Lighting by Gregory

Lightolier 7" Aperture, Metal Halide Frame-In Kit - C710MHE1

Manufacturer: Lightolier
Product Code: LL-C710MHE1
Manufacturer Code: C710MHE1

Price: $279.30
Cost: $418.95

Quantity in Basket: None

Approx. Delivery Time: 7 business days
Bookmark This Lighting By Gregory Page
Print This Lighting By Gregory Page

Click here to view Spec Sheet
Lightolier does not accept returns for items under $500 unless damaged or defective

For Lightolier orders that are time sensitive, please call our internet sales team 7 days a week at 800-807-1826 for availability check and lead time.

Picture shown may represent the fully configured fixture. Individual components, such as Trims, Frame-in Kits, housing, and accessories might have to be purchased separately.
When applicable, please see Accessories tab, Related Items tab, and Spec Sheet for guidance in choosing compatible parts.

Lightolier 7" Aperture, Metal Halide Frame-In Kit - C710MHE1

7 3/8" FIK - 100W ED17 ENCLOSED/PAR38. 100W, Elect. 120V (Enclosed)

Fixture Type: Frame-In Kit

Lamp Type: ED17, BD17 (Enclosed)

Product Information
  • Reflector: Semi-Specular anodized aluminum, 16 ga. Removable from inside fixture for access to splices and ballast.
  • Lens: Prismatic (C7E17PLWHW) or Fresnel (C7E17FLWHW) lens. Regressed 1 3/4" from ceiling line.
  • Die-Cast Baffle: Painted white, self flange, deep conical step baffle for low brightness, supports lens. Small Allen-head set screw provides secure attachment for use where vandal resistant luminaires are required.
  • Torsiontite Springs: Permit removal of lens assembly without tools.
  • Socket Cup: Galvanized steel, pre-wired with medium base pulse rated socket. Snaps onto upper reflector for secure attachment without tools; unitized construction assures proper lamp alignment to optics for consistent performance.
  • Mounting Frame: 0.048"(18-ga.) galvanized steel includes pre-installed mounting bars.
  • Mounting Ring: 0.048"(18-ga.) galvanized steel. Designed for vertical adjustment from above or below for ceilings from 0" to 2" thick. Center-line notches allow consistent alignment of multiple fixtures.
  • Retaining Springs: Rust resistant simplify reflector housing removal for inspection and maintenance.
  • Vertical Adjustment Mechanism: Accommodates mounting to virtually any ceiling system using mounting bars (provided, or 1/2" EMT tubing (by others). Single locking feature secures all adjustments. Alignment holes and markings allow fixture to be preset prior to installation.
  • Mounting Bars: 0.048" (18-ga.) pre-installed, telescoping bars extend to 30" long and lock securely into position. Built-in locking tabs provide positive attachment to common T-bar systems. Self-centering feature simplifies installation in 24" O.C. grid systems. Attaches to steel or wood joists without accessories.
  • Ballast: Electronic 120V or 277V or dual voltage (120V/277V) magnetic. Assembly is accessible from below without tools for inspection and replacement.
  • Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG, 90C through branch circuit conductors; allows inspection from below.
  • Thermal Protector: (not shown) Meets NEC and UL requirements. Do not install insulation above nor within 3" (76mm) of any part of the luminaire.
Manufacturer Name: Lightolier
UPC: 784197465131

Additional Lamp/Bulb Information

Wattage: 100W
Voltage: 120V

Certifications & Listings

U.L. Listing: UL (Suitable for Wet Locations), CSA, I.B.E.W.
  Code Name Price  
LL-C7E17FLWHW Lightolier Fresnel Lens, 7" ED17 (Enclosed) Trim Kit - C7E17FLWHW $264.67
LL-C7E17PLWHW Lightolier Prismatic Lens, 7" ED17 (Enclosed) Trim Kit - C7E17PLWHW $264.67